How to fix X8 was brick ?

Ok cui, I want to share how to fix your X8 , since my shakira was bricked. I was browsed from XDA, and I found how to fix it.

Intro
I know there are a thread with specific with this thread
but this thread will be much solution :)

Old Link (Graveir) = Xda (forum.xda-developers.com/showthread.php?p=12442257)

Warning: There are Soft Brick/Hard Please Be carefull with flashing and unlocking.

Soft Brick:
For NoObs said "bootloop"
this is a soft brick and easy to be fixed

Solution:
Xrecovery:
Use Backup (If you Did This) This is the easy way

FlashTool:
Flashtool is a software developed for Xperia X10, It Supported On X8

Tutorial:
1. Download latest version from this thread: Xda (http://forum.xda-developers.com/showthread.php?t=920746)

2. ROM Image, Contain Russia and Generic :
2.1.1.A.0.6 Generic (http://www.multiupload.com/XLV6AA41DB)
Russia 2.1 (http://www.multiupload.com/81E5SHZUG9)

3. Baseband Collection (Blagus) Many Custom Rom Use M76XX-TSNCJOLYM-53404015 which mean its xxx15 use it in this blagus folder
Mediafire (http://www.mediafire.com/?d3pobqqc3py66)

4. Place ftf file in /firmwares directory of your flashtool.

5. Install drivers from /drivers directory

6. Prepare yourself - plug the USB cable to the computer and launch flasher.

7. Click "flash", choose your ROM from the list, Wait for instructions.

8. When the instruction pops up, press and hold "back" button on your X8 and plug the cable into it. Keep holding untill you see that flashing of files has begun, then you may release it.

9. Flashing will take a while, you may observe the progress on a bottom bar. When it's finished you will be asked to plug off your device and reboot it.

10. If you wish to change baseband, clean firmware directory in flashtool and place baseband ftf file in it, then go through flashing procedure again.

11. If you try this correctly your phone will work again :D

Hard Brick:
Device Not power up, Xrecovery/CWM not working, Extreme Brick

Solution:
This instructions are software related only not for hardware

Seus/PCC:
This is easiest way to unbrick your x8
PCC:SonyEricsson (http://www.sonyericsson.com/cws/support/mobilephones/downloads/xperiax8?cc=gb&lc=en)
Seus: Seus is outdated and not continued :(

Instruction:
1. Click Support zone
2. Click Phone update (Don't connect your phone)
3. Click "repair phone"
4. Follow onscreen instruction
5. Done,Enjoy :D

FlashTool:
Flashtool is a software developed for Xperia X10, It Supported On X8

Tutorial:
1. Download latest version from this thread: Xda (http://forum.xda-developers.com/showthread.php?t=920746)

2. ROM Image, Contain Russia and Generic :
2.1.1.A.0.6 Generic (http://www.multiupload.com/XLV6AA41DB)
Russia 2.1 (http://www.multiupload.com/81E5SHZUG9)

3. Baseband Collection (Blagus) Many Custom Rom Use M76XX-TSNCJOLYM-53404015 which mean its xxx15 use it in this blagus folder
Mediafire (http://www.mediafire.com/?d3pobqqc3py66)

4. Place ftf file in /firmwares directory of your flashtool.

5. Install drivers from /drivers directory

6. Prepare yourself - plug the USB cable to the computer and launch flasher.

7. Click "flash", choose your ROM from the list, Wait for instructions.

8. When the instruction pops up, press and hold "back" button on your X8 and plug the cable into it. Keep holding untill you see that flashing of files has begun, then you may release it.

9. Flashing will take a while, you may observe the progress on a bottom bar. When it's finished you will be asked to plug off your device and reboot it.

10. If you wish to change baseband, clean firmware directory in flashtool and place baseband ftf file in it, then go through flashing procedure again.

11. If you try this correctly your phone will work again :D

Coma Brick:
Device wont power on at all or respond to button input
Don't worry ok :)

Solution:
Charge your phone with main supply (not usb) let it charge fully 4 hours
It will start again. Battery big icon will appear around 30% battery charged
Let it full or boot up

Loader Brick:
This because of false instruction of unlocking bootloader or flashing kernel

Solution:

Relock, PCCompanion
A. Relock your bootloader
B. Use PCC to restore your phone
Instruction For PCC :
1. Click Support zone
2. Click Phone update (Don't connect your phone)
3. Click "repair phone"
4. Follow onscreen instruction
5. Done


sumber